top of page

THE ELIMINATOR CA
Room Temperature Purifier for Inert Gases and Hydrogen

elim600CA_fotonew.jpg

APPLICATIONS

  • Semiconductor Industry

  • High Purity Welding

  • Inert Gas Purge

  • Gas Cylinder Cabinets

  • Gas Analyzer Carts

  • Research and Development

FEATURES

  • Removal of impurities to <1 ppb

  • No heaters or power required

  • Room-temperature operation

  • 316L SS (<10 Ra EP) vessel

  • Factory regenerable for up 10 year life

  • Field regenerable for up to 10 year life

  • Improved process equipment perfomance

  • Optional built-in 0.003 µm filter (PF type)

  • High Flow - up to 2500 slpm

  • Lowest cost (initial and operating)

NuPure's  Eliminator® CA Gas Purifiers reduce gaseous impurities to sub-ppb  levels at room temperature operation. The Eliminator® removes H2O, O2, CO, CO2, H2 and NMCH's to <1 ppb from any inert gas (Nitrogen, Argon, Helium, Krypton, Neon and Xenon) and H2O, O2 and CO2 from Hydrogen. They are ideally suited to purifying gases from liquid sources.

​

The NuPure®  Eliminator® Catalyst/Absorber (CA) chemistry represents a major improvement over catalyst-only purifiers. For example, the moisture capacity of NuPure® Model 500 CA is more than twice the moisture capacity of the Aeronex Model 500!

​

The NuPure®  Eliminator® CA gas purifiers come in standard size ranges from 0 to 2500 slpm, with the high-flow purifier versions especially suitable for applications such as welding or purging. The use of optional factory-installed inlet isolation valve (shown in photo) is recommended for ease of installation and elimination of possible operator error. 

IMPURITIES REMOVED

표_600CA.png

1 - N/R = Not Removed. Removal of all impurities can be accomplished using heated getter gas purifiers. See brochures for NuPure® PF Series™ and Omni™ Series Gas Purifiers.

Dimensional and Performance Specifications

그래프_600CA.png
도면_600CA.png

1 - Sub-micron filtration only with PF version.

2 - Instead of "GAS" put "I" for Inert Gases (e.g. 600-CA-VR4-I-PF), or "H2" (e.g. 00100-CA-VR4-H2-XL) for Hydrogen or Hydrogen Mixes (e.g. N2/H2, Ar/H2).  

3 - For model 1000 dimension “A” have changed from 12.1 inches to 12.9 inches, dimension “B” has changed from 10.3 inches to 11.1 inches.

4 - For models 5000 and larger - the printed dimensions are subject to future change. Please check with factory prior ordering.

5 - VCR-compatible fittings standard. VCR is Registered Trademark of Cajon Corp. Special fittings on request.

bottom of page