top of page

THE ELIMINATOR CG
Room Temperature Purifier for Inert Gases

elim600CG_fotonew.jpg

APPLICATIONS

  • Zero-Hydrocarbon UHP Inert Gas Purge

  • APIMS Zero and Calibration

  • Semiconductor Process Equipment

  • Gas Cylinder Cabinets

  • Gas Analyzer Carts

  • Analytical Industry

  • Research and Development

FEATURES

  • Outlet purity guarantee to < 0.5 ppb1

  • Removes all hydrocarbons, including CH4

  • No heaters or power required

  • Room-temperature operation

  • 316L SS (<10 Ra EP) vessel

  • Factory regenerable for up 10 year life

  • Field regenerable for up to 10 year life

  • Improved process equipment perfomance

  • Optional built-in 0.003 µm filter (PF type)

  • High Flow - up to 2500 slpm

  • Lowest cost (initial and operating)

NuPure's  Eliminator® CG Gas Purifier is designed to purify Inert Gases (Nitrogen or Noble Gases) to state-of-the-art purity, using a patented design and process. It removes all hydrocarbons (including methane), and all other gaseous impurities found in Inert gases, to PPT levels using room temperature operation. The Eliminator® CG is ideal for critical process and purging applications.  

 

The NuPure®  Eliminator® CG contains a new patented combination of catalyst and metal getter. It contains no hydrocarbon or sulfur compounds. The  Eliminator® CG Purifier incorporates a new unique internal filter design combined with a short purifier geometry, allowing a very high flow combined with a very low pressure drop.  

 

The  Eliminator® CG gas purifiers come in standard size ranges from 0 to 2500 slpm. The use of optional factory-installed inlet isolation valve (shown in photo) is recommended for elimination of possible operator error during installation. Optional high Cv valves are available to ensure a low system pressure drop.

IMPURITIES REMOVED

표_600CG.png

1 - Based on a VLSI Grade Liquid Gas source. Nitrogen not removed from noble gases.. Removal of nitrogen can be accomplished using heated getter purifiers. See brochures for NuPure®   PF Series™ and Omni™ Series Gas Purifiers.

Dimensional and Performance Specifications

그래프_600CG.png
도면_600CG.png

1 - Sub-micron filtration only with PF version.

2 - For model 1000 dimension “A” have  changed from 12.1 inches to 12.9 inches, dimension “B” has changed from 10.3 inches to 11.1 inches.

3 - For models 5000 and larger - the printed dimensions are subject to future change. Please check with factory prior ordering.

4 - VCR-compatible fittings standard. VCR is Registered Trademark of Cajon Corp. Special fittings on request.

bottom of page